function googleTranslateElementInit() { new google.translate.TranslateElement({pageLanguage: 'en', layout: google.translate.TranslateElement.InlineLayout.SIMPLE}, 'google_translate_element'); }
6063 grade is commonly referred to as the architectural alloy. It was developed as an extrusion alloy with relatively high tensile properties, excellent finishing characteristics and a high degree of resistance to corrosion. This alloy is most often found in various interior and exterior architectural applications, such as windows, doors, store fronts and assorted trim items. It is the alloy best suited for anodizing applications - either plain or in a variety of colors.
N/A1.750 x 1.750 x 0.125 inches44.45 x 44.45 x 3.175毫米
宽度
N/A1 3/4 inches
Length
N/A1 3/4 inches
高度
N/A0.125英寸
Weight
N/A0.9458磅/英尺1.4075055112 kg/m
估计重量
N/A19.941磅9.0452376公斤
估计重量24'
N/AAMS-QQ-A-200/9
Density
N/A0.097 lbs/in³
Specific Gravity
N/A2.70
Typical Mechanical Properties
Ultimate Strength
N/A27 KSI
Yield Strength
N/A21 ksi
2英寸的伸长百分比
N/A12
Hardness Brinnel Number
N/A60
终极剪切强度
N/A17 ksi
Fatigue Endurance Limit1
N/A10 ksi
Modulus of Elasticity2
N/A10.0 x 103ksi
Comparative Characteristics and Applications
对腐蚀的抗性 - 一般3
N/AA
应力腐蚀破裂
N/AA
Workability (Cold)
N/AB
Mechinability
N/AC
Brazeability4
N/AA
气焊性5
N/AA
Arc Weldability6
N/AA
Resistance Spot and Seam Weldability7
N/AA
Applications
N/A管道栏杆,家具,建筑挤压
铝合金名称
N/A
The aluminum industry uses a four-digit index system for the designation of its wrought aluminum alloys. As outlined below, the first digit indicates the alloy group according to the major alloying elements.
1xxx Series In this group minimum aluminum content is 99% and there is no major alloying element. The second digit indicates modifications in impurity limits. If the second digit is zero, there is no special control on individual impurities. Digits 1 through 9, which are assigned consecutively as needed, indicate special control of one or more individual impurities. The last two digits indicate specific minimum aluminum content. Although the absolute minimum aluminum content in this group is 99%, the minimum for certain grades is higher than 99%, and the last two digits represent the hundredths of a per cent over 99. Thus, 1030 would indicate 99.30% minimum aluminum. without special control on individual impurities. The designations 1130, 1230, 1330, etc.. indicate the same purity with special control on one or more impurities. Likewise 1100 indicates minimum aluminum content of 99.00% with individual impurity control.
2xxx至9xxx系列 The major alloying elements are indicated by the first digit, as follows:
2xxx Copper 3xxx Manganese 4xxx Silicon 5xxx Magnesium 6xxx Magnesium and silicon 7xxx Zinc 8xxx Other element 9xxx Unused series
4Ratings A through D for Weldability and Brazeability are relative ratings.
5A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.
6A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.
7A = Generally weldable by all commercial procedures and methods. B = Weldable with special techniques or for specific applications that justify preliminary trials or testing to develop welding procedure and weld performance. C = Limited weldability because of crack sensitivity or loss in resistance to corrosion and mechanical properties.